Surface Raceway, 3/4″, 6ft, Office White


Width Height Length Color Weight
84″ 20″ 14″ Black 28LB
Maximum Fit Capacity Chart
Raceway Size CAT5E* CAT6*h CAT6A*
3/4in 2 2 1
1 1/4in 5> 4 2
1 3/4in 11 8 5
*Estimates based on 4mm (.16in) Diameter CAT5E, 5mm (.20in) Diameter CAT6, 6.5mm (.26in) Diameter CAT6A
  • Tamper resistant, self-locking cover, hidden positive latch permits quick re-entry as well as a secure installation of cable
  • UL 94V-0 rated PVC material
  • Fittings incorporate a minimum 1″ bend radius per TIA/EIA 568-B and 569-A standards
  • Rubber-based foam tape adhesive with high ultimate bond strength conforms to any surface
  • Flexible hinge allows the raceway to endure numerous openings without creating discoloration or stress cracking
  • Junction boxes can be used with this raceway for electrical or data outlets
  • Vertical Cable’s low voltage raceway (TSR) is a one piece, non-metallic, adhesive-back, latching raceway designed to aesthetically organize and route communications wires including high speed UTP cable and fiber optic cable from the telecommunications room to the work area
  • Available in Ivory and Office White
  • 20 per pack (can be bought individually)
  • UL Listed


This product is TAA-Compliant and can be used for Governmental projects.

What is TAA Compliance?

As outlined by the Trade Agreement Act (1979), US Government and affiliated entities with federal contracts are required to purchase only “end products” made or substantially transformed within the United States or other TAA “Designated Countries.”  “End products” are defined by the Act as “those articles, materials and supplies to be acquired for public use.”  The TAA requires suppliers to certify that each “end product” meets these requirements.

The Trade Agreement Act (TAA) is intended to foster the growth and maintenance of a fair and open trading system. TAA compliance requires that the U.S. Government (including GSA) acquires only U.S. – made or certain “designated country” end products. This means that all products must be either manufactured or “substantially transformed” in the United States or a TAA compliant country.

In the situation were a product is assembled or comprised of components from several different countries, the guideline applies to the last country that the product is in before imported to the United States. At least 50% of the production must be completed by a TAA compliant country.

Read more at GSA.gov